From the category archives:

Truck Cap Camper Shell Racks

YouTube Preview Image

Here’s a really solid overview of the Thule 460R Rapid Podium roof rack system, featuring the ultra-sleek and whisper-silent Thule AeroBlade crossbars. The informational video includes an installation of the complete car rack system on  rooftop fixed-points for a premium factory rack looking 2011 Honda CR-V roof rack crossbars multi-purpose system. With the system installed you can then connect any roof mount gearcarrier attachments to the AeroBlade load bars. The components used in the 2011 Honda CRV car rack install are the Thule 460R Rapid Podium Foot Pack, Thule 3042 Podium Fit Kit and pair of Thule ARB47 AeroBlade load bars. The 460R Rapid Podium system is Thule Racks most versatile roof rack solution, as it is often used for other configurations such as mounting to flush side rails, roof tracks and certain custom, permanent rack applications. There are many Podium Fit Kits available, each designed for a specific application and particular vehicle year/make/model.

{ Comments on this entry are closed }

Thule AeroBlade Load Bars – ARB60 ARB53 ARB47 ARB43

by rackdawg on September 16, 2011

Image of the radical new ARB60 Thule AeroBlade load bars, the longest size crossbars (60 inches) in the new Thule Racks AeroBlade bars line up. Other sizes include the Thule ARB43 AeroBlade (43 inches), Thule ARB47 AeroBlade (47 inches), Thule ARB53 AeroBlade (53 inches).

Image of the radical new ARB60 Thule AeroBlade load bars, the longest size crossbars (60 inches) in the new Thule Racks AeroBlade bars line up. Other sizes include the Thule ARB43 AeroBlade (43 inches), Thule ARB47 AeroBlade (47 inches), Thule ARB53 AeroBlade (53 inches).

The Thule AeroBlade bars are Thule Racks winning entry into the realm of aerofoil shape crossbars that eliminate all roof rack wind noise, humming and whistling.

The Thule AeroBlade bars are Thule Racks winning entry into the realm of aerofoil shape crossbars that eliminate all roof rack wind noise, humming and whistling.

All Thule AeroBlade load bars fit the entire line-up of Thule Rapid Foot Pack roof rack systems, including 450R Rapid CrossRoad, 480R Rapid Traverse, 460R Rapid Podium, 400XTR Rapid Aero and 430R Rapid Tracker.

All Thule AeroBlade load bars fit the entire line-up of Thule Rapid Foot Pack roof rack systems, including 450R Rapid CrossRoad, 480R Rapid Traverse, 460R Rapid Podium, 400XTR Rapid Aero and 430R Rapid Tracker.

Not to be outdone by Yakima’s recent release of the Whispbar Racks series of  ‘whisper quiet’ roof rack systems using wind-tunnel tested aerofoil shape crossbars, Thule Racks has just thrown their hat in the ring with the launch of the awesome Thule AeroBlade load bars. Available in four different sizes – Thule ARB60 AeroBlade load bars (60″ size), Thule ARB53 AeroBlade load bars (53″ size), Thule ARB47 AeroBlade load bars (47″ size) and Thule ARB43 AeroBlade load bars (43″ size) – these sizes are exactly the same lengths as the Thule Rapid Aero load bars. There is a very good reason for this, as Thule thoughfully designed the AeroBlades to replace the Rapid Aeros (which have been retired from production) and work on all the same Thule Rapid Foot Pack roof rack systems that the Rapid Aero crossbars worked on – including the 480R Rapid Traverse Foot Pack, 460R Rapid Podium Foot Pack, 450R Rapid CrossRoad Foot Pack, 430R Rapid Tracker Foot Pack and 400XTR Rapid Aero Foot Pack. This makes it very easy and economical for those that currently own a car rack system using the Rapid Aero cross bars to upgrade to the vastly superior AeroBlade load bars, as all that is required is to buy a pair of Aero Blade bars. They attach right to the Rapid Foot Packs for a seamless transition over to the incredible benefits and features of the AeroBlades. The result of laborious, rigorous testing under all conditions and wind-tunnel analytics, the Thule AeroBlade load bars deliver a sleek, fast aerofoil shape that eliminates the possibility of roof rack noise, humming or whistling. Furthermore, the superior aerodynamics actually work to noticeably reduce fuel costs compared to all other crossbars available on the market today. Nor is there ever a need to spend additional money to buy a wind fairing accessory that is normally used to try and lessen noise that often occurs with all other cross bars (though a fairing will never eliminate noise entirely). With technological advancements that include WindDiffuser Technology, SwingBlade Technology, BoxBeam Technology SmartSlide Technology and more (check out this thorough page resource of Thule AeroBlade load bars details and information), it is becoming more and more difficult to find valid reasons to use regular crossbars such as square and round bars. Especially since over the long run, the more expensive aerodynamic AeroBlades will actually pay for themselves over the long haul.

{ Comments on this entry are closed }

Picture of the TracRac CapRac truck cap rack - tonneau cover rack system, a versatile professional grade work rack for pickup truckbed camper shells, caps, toppers and fiberglass tonneau covers. Also serves as an excellent truck rack for carrying sports gear and equipment.

Picture of the TracRac CapRac truck cap rack - tonneau cover rack system, a versatile professional grade work rack for pickup truckbed camper shells, caps, toppers and fiberglass tonneau covers. Also serves as an excellent truck rack for carrying sports gear and equipment.

Now owned by the Thule Group, parent company of Thule Racks, the TracRac Truck Rack Company is uniquely situated to dominate the commercial work rack market even further. With the backing of Thule Racks engineers, product developers and efficient production and manufacturing systems in the United States, Trac Rac Truck Racks is upgrading and improving their entire product line with even more features and benefits. Witness the release of the TracRac CapRac truck cap rack system, specifically designed for permanently mounting to any pickup truck bed camper shell, topper or cap (alse serves as an excellent fiberglass tonneau cover rack). The TracRac CapRac now uses a very innovative swivel bracket mounting design for a universally perfect fit on virtually all styles and designs of pickup truck caps, camper shells, toppers and fiberglass tonneau covers. All the fastener hardware is also hidden, delivering a very impressive clean and finished look. The included gaskets also ensure the TracRac CapRac truck rack remains 100% waterproof at all times. Also includes a full set of Load Stops that serve as the perfect tie-downs to secure and stabilize a wide variety of gear and equipment such as ladders, lumber and plywood, conduit and piping etc. The premium, universal  Trac Rac cross bars also serve double time for leisure and recreational sport activities. Go ahead and mount a wide selection of roof baskets, cargo boxes, bike racks, kayak racks, canoe carriers, stand-up paddleboard and surfboard racks, ski and snowboard carriers etc.

{ Comments on this entry are closed }

Picture of the Whispbar Racks HD Bar combination sport-work rack, the ideal choice for any professional applications, commercial work use as well as playing and having fun. Whispbar is owned by the Yakima Rack Company.

Picture of the Whispbar Racks HD Bar combination sport-work rack, the ideal choice for any professional applications, commercial work use as well as playing and having fun. Whispbar is owned by the Yakima Rack Company.

Now available at select Yakima Racks dealers thoughout the United States and Canada is the all-new Whispbar HD Bar roof rack system, the ultimate multi-purpose base rack system for anyone seeking to combine work applications with sport and having fun. Whispbar Racks is owned by Yakima, and the product line is a premium high-end option for those seeking the ultimate blend of aesthetics, universal ease of use, durability and whisper quiet cross bars that produce no noise, whistling, humming etc. The cross bars also effectively reduce wind drag and deliver better fuel economy than any other roof rack options on the market today. The Whispbar HD Bar system uses the same SmartFoot engineering as other Whispar rack models. The Smart Foot is a proprietary Yakima innovation that allows the SmartFoot to combine with any number of different Base Fit Kit options to mount to any vehicle rooftop style. Whether you need a roof rack that mounts to a completely naked rooftop, factory side rails (both flush and raised types), fixed-points, roof tracks, raingutters or even a custom permanent rack mounting application, the Whispbar HD Bar SmartFoot and appropriate Base Fit Kit will do the job. The HD Bar roof rack differs from the other Whispbar options (FlushBar, ThroughBar and Rail Bar) because the cross bars are more heavy duty and can handle up to 220 lbs of weight while the crossbars on the Flush Bar, Through Bar and RailBar models hold up to 165 lbs of weight. The HD Bars also have a uni strut T-slot running the length of them to allow for attaching many different work rack accessories such as tie-downs, load stops, ladder holders and ladder rollers, ratcheting cargo buckles, pipe and conduit holders and more. The HD Bars also have integrated tie-down points to secure any gear load. Also has rubber stripping running down the bars to protect the gear load and the crossbars themselves. Also serves to prevent the load from shifting laterally when in transit. 

Learn about Whispbar Racks

{ Comments on this entry are closed }

Picture of the all-new Thule 3113 Podium Fit Kit which replaces the discontinued Thule TK13 Tracker Kit (as the 430 / 430R Tracker II systems are discontinued and are replaced by the 460 / 460R Podium roof racks for applications such as permanent install racks, fixed-point racks, roof track racks, flush side rail racks, factory roof track racks etc.) The Thule 3113 Fit Kit is for drilling and permanently installing a roof rack on fiberglass surfaces such Jeep Hard Top, camper shell, tonneau cover etc .)

Picture of the all-new Thule 3113 Podium Fit Kit which replaces the discontinued Thule TK13 Tracker Kit (as the 430 / 430R Tracker II systems are discontinued and are replaced by the 460 / 460R Podium roof racks for applications such as permanent install racks, fixed-point racks, roof track racks, flush side rail racks, factory roof track racks etc.) The Thule 3113 Fit Kit is for drilling and permanently installing a roof rack on fiberglass surfaces such Jeep Hard Top, camper shell, tonneau cover etc .)

Photo of the Thule 3114 Podium Fit Kit which replaces the discontinued TK14 Tracker Kit and is for drilling and permanently installing a roof rack on any pickup truck,van and car metal rooftop surfaces etc.

Photo of the Thule 3114 Podium Fit Kit which replaces the discontinued TK14 Tracker Kit and is for drilling and permanently installing a roof rack on any pickup truck,van and car metal rooftop surfaces etc.

Thule Racks has completely overhauled the popular Thule 460 Podium Foot Pack and 460R Rapid Podium Foot Pack and included many more Podium Fit Kits (previously the 460 / 460R Podium was only compatible with vehicle rooftop fixed-points) and now works on factory rack flush side rails, factory rack tracks and all Thule Tracks, as well as applications for permanently installing a roof rack on fiberglass surfaces and sheet metal surfaces. Hence, the Podium system now replaces the discontinued Thule 430 Tracker II Foot Pack / 430R Tracker II Foot Pack and all TK Tracker Kits. The Thule 3113 Podium Fit Kit replaces the TK13 Tracker Kit and is for drilling and installing a permanent roof rack on any fiberglass surfaces (applications include pickup truck camper shell, topper & truckbed cap roof racks, tonneau cover racks, Jeep Wrangler Hard Top roof racks etc.) Likewise, the Thule 3114 Podium Fit Kit replaces the TK14 Tracker Kit and is for drilling and installing a permanent roof rack on any sheet metal surfaces such as pickup truck, car and van metal rooftops etc.

{ Comments on this entry are closed }

Picture of the Thule 3101 Fit kit now available from Thule Racks. Replaces the discontinued Thule TK1 Tracker Kit. The 3101 Podium Fit Kit is for use with any Thule Tracks and many factory rack tracks.

Picture of the Thule 3101 Fit kit now available from Thule Racks. Replaces the discontinued Thule TK1 Tracker Kit. The 3101 Podium Fit Kit is for use with any Thule Tracks and many factory rack tracks.

Thule Racks has just released the all-new Thule 3101 Podium Fit Kit, part of the new series of Podium Fit Kits that replace the discontinued Thule TK1 Tracker Kits as the Thule 430 Tracker II roof rack system begins to fade from the Thule Racks product line up. Now the Thule 460 Podium Foot Pack and Thule 460R Rapid Podium Foot Pack can be used on more roof rack applications besides mounting to fixed-points on vehicle roof tops. With the release of the Thule 3101 Fit Kit you can now use the 460 / 460R Podium systems on any permanent mounting Thule Tracks (TB60, TP54, TP42 etc.) as well as a large number of factory rack tracks found on certain vehicles. In fact, Thule has created a Podium Fit Kit to replace each TK Tracker Kit – the 3101 Podium Fit Kit replaces the TK1 Tracker Kit, 3102 replaces TK2, 3103 replaces TK3, 3104 replaces TK4, 3105 replaces TK5, 3106 replaces TK6, 3107 replaces TK7, 3108 replaces TK8, 3109 replaces TK9, 3110 replaces TK10, 3111 replaces TK11, 3112 replaces TK12, 3113 replaces TK13 and 3114 replaces TK14.  The Thule 460 Podium and Thule 460R Rapid Podium can now also be used on vehicles with flush side rails.

{ Comments on this entry are closed }

ORS Racks Direct recently launched an exclusive TracRac truck racks interative online fit selection tool to determine which current Trac Rac products are compatible with any specific pickup truck, van or utility vehicle.

ORS Racks Direct recently launched an exclusive TracRac truck racks interative online fit selection tool to determine which current Trac Rac products are compatible with any specific pickup truck, van or utility vehicle.

Interested in TracRac’s new line-up of truck racks, van racks and utility vehicle racks – the TracRac G2, T-Rac G2, TracONE, CabRac, CapRac, TracVan and Utility Rac – and wondering which models fit your specific pickup truck, van or utility vehicle? You can now look to ORS Racks Direct for their all-new exclusive TracRac truck racks online fit selection tool. Simply select your vehicle specifics and you are instantly presented with all the possible Trac Rac rack systems and accessories that are compatible with your vehicle.

{ Comments on this entry are closed }

2009 GMC Sierra Camper Shell Rack

by Rack Princess on February 8, 2011

Image of 2009 GMC Sierra pickup truck camper shell rack.  Consists of Yakima 60 inch roof tracks, Yakima control towers roof rack with LP1 landing pads & Yakima MegaWarrior Cargo Basket.

Image of 2009 GMC Sierra pickup truck camper shell rack. Consists of Yakima 60 inch roof tracks, Yakima control towers roof rack with LP1 landing pads & Yakima MegaWarrior Cargo Basket.

This camper shell roof rack for a 2009 GMC Sierra pickup truck makes it possible to carry a lot of gear and mount some high power LED lights on the front as well. This pickup truck camper shell roof rack set up consists of Yakima 60 inch roof tracks which are mounted directly to the camper shell and the Yakima Control Towers Roof Rack system with Yakima LP1 Landing Pads, Yakima MegaWarrior Cargo Basket, Yakima MegaWarrior Extension and Yakima Lighting Mount Brackets.  That’s one loaded potato.

Complete 2009 GMC Sierra pickup truck camper shell rack info…

{ Comments on this entry are closed }

1997 Toyota Tacoma Camper Shell Rack

by Rack Princess on December 8, 2010

1997-toyota-tacoma-truck-cap-roof-rack-915

Roof rack for 1997 Toyota Tacoma SR5 Extra Cab pickup truck with camper shell consisting of Thule / Dewalt 342 PRO cap rack.

This 1997 Toyota Tacoma camper shell rack is the Thule Dewalt 342 PRO contractor grade pickup truck cap rack system.  It has the strength to carry up to 500 pounds and can be fitted with a whole range of accessories as well and is made to fit any truck bed cap made of fiberglass or aluminum.

More info on camper shell rack for 1997 Toyota Tacoma.

{ Comments on this entry are closed }

1995 Mazda B4000 Pickup Truck Cap Roof Rack

by Rack Princess on November 2, 2010

1995 Mazda B4000 pickup truck camper shell roof rack featuring Yakima 1A Hi-Rise Roof Rack and Yakima Side Loader Brackets.

1995 Mazda B4000 pickup truck camper shell roof rack featuring Yakima 1A Hi-Rise Roof Rack and Yakima Side Loader Brackets.

Oh yes – there is a perfect solution for everything. This roof rack for a 1995 Mazda B4000 pickup truck cap uses the Yakima 1A Hi-Rise raingutters roof rack which comes with a set of 4 Yakima 1A Hi-Rise Towers and a pair of 58 inch crossbars.  The Yakima 1A Towers attach to the Yakima Side Loader Brackets which are artificial raingutter brackets for custom installations like installing a roof rack on a camper shell seen here.

More info and photos of 1995 Mazda B4000 pickup truck camper shell rack.

{ Comments on this entry are closed }

This 2010 Ford Explorer Sport Trac Bike and Canoe Rack easily transports one canoe and two bicycles using:  for the roof, the Yakima Railgrab roof rail system which attaches to the 2010 Ford Explorer Sport Track factory side rails, and the Yakima Gunwale Brackets Canoe Carrier.  The Tonneau cover bike rack uses the Yakima Control Tower base rack with two pairs of the Yakima Landing Pad 6 and two Yakima High Roller Bike Racks.

This 2010 Ford Explorer Sport Trac Bike and Canoe Rack easily transports one canoe and two bicycles using: for the roof, the Yakima Railgrab roof rail system which attaches to the 2010 Ford Explorer Sport Track factory side rails, and the Yakima Gunwale Brackets Canoe Carrier. The Tonneau cover bike rack uses the Yakima Control Tower base rack with two pairs of the Yakima Landing Pad 6 and two Yakima High Roller Bike Racks.

This is how you do it folks.  This is a 2010 Ford Explorer Sport Trac canoe roof rack and Tonneau cover bike rack using all Yakima racks.  Mounted to the ’10 Ford Explorer factory side rails is the Yakima RailGrab rail rack system with Yakima 48″ round crossbars.  Attached to the roundbars is the Yakima Gunwale Brackets canoe rack, which comes with the necessary straps and tie downs.  On the 2010 Ford Explorer Sport Track Tonneau cover is the Yakima Control Tower base sytem attached to the tonno cover using two sets of the Yakima Landing Pad 6 Permanent Landing Pads for tonneau covers, camper shells, etc. Mounted to the yakima 48″ crossbars are two Yakima Highroller bike racks.  If my math is correct, a Yakima SKS 8 Lock Pack would lock down the two Yakima base rack systems and the two Yakima bike racks, and all with one Yakima SKS key. 

More photos and omplete installation details for 2010 Ford Explorer Sport Trac Canoe Rack and Bike Rack. 

{ Comments on this entry are closed }

2008 Toyota Tacoma Pickup Ladder Rack

by Rack James on June 30, 2010

2008-toyota-tacoma-leer-cap-roof-rack-dewalt-342-624

Top notch pic of a Toyota Tacoma Extended Cab pickup with Leer Cap using the Thule-Dewalt 342 Truck Rack System.

This is a great shot of the Thule – Dewalt 342 Truck Rack System for aluminum and fiberglass caps doing what it does best: carrying stuff on the roof of a Leer cap attached to an ’08 Toyota Tacoma pickup.   The system uses four mounting points that are installed permanently, and the feet that support the crossbars can easily be removed and installed into those points as needed.  The System comes with four Load Stops, which you can see doing a great job supporting this ladder, but which also do a great job with canoes, lumber, and any other long, heavy loads. 

Full details for Toyota Tacoma ’08 Truck Rack for Leer Caps using Thule-Dewalt 342 Truck Rack.

{ Comments on this entry are closed }

2006 Dodge Ram A.R.E. Camper Shell Roof Rack

by rackdawg on April 14, 2010

A very slick 2006 Dodge Ram A.R.E. truck cap roof rack photo that shows the Yakima Tracks mounted tothe A.R.E. camper shell and Yakima Control Towers system attached to the Tracks.

A very slick 2006 Dodge Ram A.R.E. truck cap roof rack photo that shows the Yakima Tracks mounted to the A.R.E. camper shell and Yakima Control Towers system attached to the Tracks.

This 2006 Dodge Ram ARE camper shell rack system is configured using the 60 inch Yakima Tracks, which are installed onto the A.R.E. truck cap roof top. The Tracks can be quickly cut to any shorter length for a nice and custom fit for any gear equipment transport needs or camper shell roof top.  The Yakima Control Towers roof rack is then attached to the Tracks via the included Yakima LP1 Landing Pads (also included are the set of four Control Towers and pair of Yakima cross bars, the 58″ length bars are ideal for this set up). The LP1 Yakima # 1 Landing Pads mount right onto the Tracks and then the Control Towers snap onto the Lp1 Landing Pads. Just a super, simple to install and use camper shell rack that also provides a very premium, integrated look.

2006 Dodge Ram A.R.E. camper shell roof rack install details

{ Comments on this entry are closed }